Original file

Land Rover Defender 2.5TD 5 KW MMS3

An original (stock) flash read of the MMS3 control unit, fitted in Land Rover Defender 2.5TD 5 KW, 128.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Land Rover Defender 2.5TD 5 KW2.5 diesel · 122.0PS / 89.7kW
Control unit
MMS3
File size
128.00 KB
Contents
Flash

Technical data

Vehicle
BrandLand Rover
Car modelDefender 2.5TD 5 KW
Engine2.5 diesel
Power122.0PS / 89.7kW
Control unit
Control unitMMS3
File
File typeOriginal flash read
File size128.00 KB (131,072 bytes)
From the file nameLand Rover Defender KW Bosch
File key36e51f15766d9d03

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a MMS3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of MMS3

HardwareSoftwareVehicles
Land Rover DefenderLand Rover Defender
Land Rover Defender 2.5TD 5 TurbodieselLand Rover Defender 2.5TD 5 Turbodiesel
Land Rover DiscoveryLand Rover Discovery
Land Rover Discovery 2.5TD 5 TurbodieselLand Rover Discovery 2.5TD 5 Turbodiesel

MMS3 original files