Original file

Scania 340 340 Turbodiesel MS6.2

An original (stock) flash read of the MS6.2 control unit, fitted in Scania 340 340 Turbodiesel, 256.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Scania 340 340 Turbodieseldiesel 340PS
Control unit
MS6.2
File size
256.00 KB
Contents
Flash

Technical data

Vehicle
BrandScania
Car modelScania 340 340 Turbodiesel
Enginediesel 340PS
Displacement12.0
Power340.0PS / 250.1kW
Control unit
Control unitMS6.2
File
File typeOriginal flash read
File size256.00 KB (262,144 bytes)
From the file nameScania 340 Turbodiesel Bosch
File keyae085582d9b0c313

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a MS6.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of MS6.2

HardwareSoftwareVehicles
Scania R-SeriesScania R-Series
Scania R420Scania R420
Scania R480Scania R480
Scania 164 580 TurbodieselScania 164 580 Turbodiesel
Scania P R TScania P R T
1052710527Iveco Stralis
107981Scania 164-580
1600121410Scania

MS6.2 original files