Original file
Scania MS6.2
An original (stock) flash read of the MS6.2 control unit, fitted in Scania, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
| Brand | Scania |
|---|---|
| Engine | 4.3 |
| Displacement | 4.3 |
| Control unit | MS6.2 |
|---|
| File type | Original flash read |
|---|---|
| File size | 512.00 KB |
| File key | ccd5c7e0df786e3a |
| Price | 15 € |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a MS6.2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.
Other pairs of MS6.2
| Hardware | Software | Vehicles |
|---|---|---|
| DAF CF85 340 2004 | DAF CF85 340 2004 | |
| DAF XF | DAF XF | |
| Iveco Stralis | Iveco Stralis | |
| DAF CF85 | DAF CF85 | |
| DAF CF85 340 2002 | DAF CF85 340 2002 | |
| DAF CF | DAF CF | |
| DAF CF 85 12.0.6 | DAF CF 85 12.0.6 | |
| Renault Magnum | Renault Magnum | |