Original file

Audi A6 TEMIC501 4G0927156K / 4G1927156

An original (stock) flash read of the TEMIC501 control unit, fitted in Audi A6, hardware number 4G0927156K and software number 4G1927156, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 petrol 300PS
Control unit
TEMIC501
File size
2,048.00 KB
Contents
Flash
Hardware number
4G0927156K
Software number
4G1927156

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 petrol 300PS
Power300.0PS / 220.6kW
Control unit
Control unitTEMIC501
Hardware number4G0927156K
Software number4G1927156
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key10673a24e9fe943f

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a TEMIC501 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0927156K and software number 4G1927156. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of TEMIC501

TEMIC501 original files