Original file

SAAB 9-3 TRIONIC 8 863232AC0AE1VE1F / 55353231

An original (stock) flash read of the TRIONIC 8 control unit, fitted in SAAB 9-3, hardware number 863232AC0AE1VE1F and software number 55353231, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandSAAB
Car model9-3
Engine210PS
Power210.0PS / 154.5kW
Control unit
Control unitTRIONIC 8
Hardware number863232AC0AE1VE1F
Software number55353231
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key1a00417b9c44015d
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a TRIONIC 8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 863232AC0AE1VE1F and software number 55353231. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of TRIONIC 8

HardwareSoftwareVehicles
21871883SAAB 9-3
5535268955352688SAAB 9-3
6809067A90355536288SAAB 9-3, SAAB 93

TRIONIC 8 original files