Original file

Audi A4 VL381 0AW927156K

An original (stock) flash read of the VL381 control unit, fitted in Audi A4, hardware number 0AW927156K, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 petrol 180PS
Fuelpetrol
Displacement2.0
Power180.0PS / 132.4kW
Control unit
Control unitVL381
Hardware number0AW927156K
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keycee48f0aa06e8caa
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a VL381 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0AW927156K. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of VL381

HardwareSoftwareVehicles
Audi A4Audi A4
Audi A6Audi A6
0AW_20TDI_RdWAudi A6, Audi A4
4G1927155Audi A6
4G1927155PAudi A6
4G2927155DAudi A6
8K0927155Audi A5 GEARBOX-REMAP, Audi A4, Audi A5
8K0927155AAAudi A5

VL381 original files