Original file

Renault Clio RS Sagem S3000

An original (stock) flash read of the Sagem S3000 control unit, fitted in Renault Clio RS, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Renault Clio RS2.0 petrol 200PS
Control unit
Sagem S3000
File size
512.00 KB
Contents
Flash

Technical data

Vehicle
BrandRenault
Car modelClio RS
Engine2.0 petrol 200PS
Power200.0PS / 147.1kW
Control unit
Control unitSagem S3000
ECU makerSagem
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File keybf79b47e3a459735

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Sagem S3000 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Sagem S3000

HardwareSoftwareVehicles
RenaultRenault
Renault ClioRenault Clio
Renault LAGUNARenault LAGUNA
Renault LAGUNA GTRenault LAGUNA GT
Renault LagunaRenault Laguna
Renault MeganeRenault Megane
0231344444Renault Megane II, Renault Scenic, Renault Megane
02313444448200785136Renault

Sagem S3000 original files

The Sagem S3000 unit page