Original file
Dodge RAM 2500 LARAMIE Siemens CM2200 5268442
An original (stock) flash read of the Siemens CM2200 control unit, fitted in Dodge RAM 2500 LARAMIE, hardware number 5268442, 3,076.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Dodge RAM 2500 LARAMIE6.7 314PS
- Control unit
- Siemens CM2200
- File size
- 3,076.00 KB
- Contents
- Flash
- Hardware number
- 5268442
Technical data
| Brand | Dodge |
|---|---|
| Car model | RAM 2500 LARAMIE |
| Engine | 6.7 314PS |
| Power | 314.1PS / 231.0kW |
| Control unit | Siemens CM2200 |
|---|---|
| ECU maker | Siemens |
| Hardware number | 5268442 |
| File type | Original flash read |
|---|---|
| File size | 3,076.00 KB (3,149,824 bytes) |
| File key | d4e945238984a367 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Siemens CM2200 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 5268442. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.