Original file

Volkswagen Passat 2.0 TDI Siemens PPD 1.2 03G906018EM / SN1L80

An original (stock) flash read of the Siemens PPD 1.2 control unit, fitted in Volkswagen Passat 2.0 TDI, hardware number 03G906018EM and software number SN1L80, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat 2.0 TDI2.0 diesel
Control unit
Siemens PPD 1.2
File size
8,192.00 KB
Contents
Flash
Hardware number
03G906018EM
Software number
SN1L80

Technical data

Vehicle
BrandVolkswagen
Car modelPassat 2.0 TDI
Engine2.0 diesel
Control unit
Control unitSiemens PPD 1.2
ECU makerSiemens
Hardware number03G906018EM
Software numberSN1L80
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key27f4ae7ec938bfb1

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Siemens PPD 1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906018EM and software number SN1L80. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Siemens PPD 1.2

Siemens PPD 1.2 original files