Original file

Audi A7 3.0 TDI CR Temic AL552 4K0927158AP / VAG_8HPTU_AUAM16F0

An original (stock) flash read of the Temic AL552 control unit, fitted in Audi A7 3.0 TDI CR, hardware number 4K0927158AP and software number VAG_8HPTU_AUAM16F0, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A7 3.0 TDI CR3.0 diesel 286.0PS / 210.4kW
Control unit
Temic AL552
File size
4,096.00 KB
Contents
Flash
Hardware number
4K0927158AP
Software number
VAG_8HPTU_AUAM16F0

Technical data

Vehicle
BrandAudi
Car modelA7 3.0 TDI CR
Engine3.0 diesel 286.0PS / 210.4kW
Control unit
Control unitTemic AL552
ECU makerTemic
Hardware number4K0927158AP
Software numberVAG_8HPTU_AUAM16F0
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc13c96a676f33a03

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic AL552 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4K0927158AP and software number VAG_8HPTU_AUAM16F0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic AL552

Temic AL552 original files

The Temic AL552 unit page