Original file
Škoda Superb Temic DQ200 Gen2 0CW300027M
An original (stock) flash read of the Temic DQ200 Gen2 control unit, fitted in Škoda Superb, software number 0CW300027M, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Škoda Superb1.5 diesel 150PS
- Control unit
- Temic DQ200 Gen2
- File size
- 1,504.00 KB
- Contents
- Flash
- Software number
- 0CW300027M
Technical data
| Brand | Škoda |
|---|---|
| Car model | Superb |
| Engine | 1.5 diesel 150PS |
| Power | 150PS / 110.3kW |
| Control unit | Temic DQ200 Gen2 |
|---|---|
| ECU maker | Temic |
| Software number | 0CW300027M |
| File type | Original flash read |
|---|---|
| File size | 1,504.00 KB (1,540,096 bytes) |
| File key | b97ceff0963bec23 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Temic DQ200 Gen2 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 0CW300027M. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Temic DQ200 Gen2
| Hardware | Software | Vehicles |
|---|---|---|
| 0CW300048J | Volkswagen Golf | |
| 020CW300040P | 039FEJRMRBEB | Volkswagen Polo |
| 039FEJRMRHEH | 070CW300043T | Volkswagen Polo |