Original file

Volkswagen Polo Temic DQ200 0CW300040

An original (stock) flash read of the Temic DQ200 control unit, fitted in Volkswagen Polo, software number 0CW300040, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Polo1.4 petrol 150PS
Control unit
Temic DQ200
File size
1,504.00 KB
Contents
Flash
Software number
0CW300040

Technical data

Vehicle
BrandVolkswagen
Car modelPolo
Engine1.4 petrol 150PS
Power150.0PS / 110.0kW
Control unit
Control unitTemic DQ200
ECU makerTemic
Software number0CW300040
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key56866aa37068065f

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ200 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 0CW300040. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DQ200

HardwareSoftwareVehicles
0AM300066JVolkswagen
0AM300066KVolkswagen
0AM300066LŠkoda Fabia, Volkswagen
0AM300066MVolkswagen
0CW300040EAudi A3
0CW300040GVolkswagen Polo, Seat
0CW300040NSeat Rapid, Škoda
0CW300041BSeat Leon, Seat Golf 7, Seat A3

Temic DQ200 original files

The Temic DQ200 unit page