Original file

Audi TT Temic DQ250-6A/6F/6V-MQB 0D9300013C

An original (stock) flash read of the Temic DQ250-6A/6F/6V-MQB control unit, fitted in Audi TT, software number 0D9300013C, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi TT2.0 petrol 230PS
Control unit
Temic DQ250-6A/6F/6V-MQB
File size
1,504.00 KB
Contents
Flash
Software number
0D9300013C

Technical data

Vehicle
BrandAudi
Car modelTT
Engine2.0 petrol 230PS
Power230.0PS / 169.2kW
Control unit
Control unitTemic DQ250-6A/6F/6V-MQB
ECU makerTemic
Software number0D9300013C
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key01875347f21517eb

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ250-6A/6F/6V-MQB whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 0D9300013C. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DQ250-6A/6F/6V-MQB

Temic DQ250-6A/6F/6V-MQB original files