Original file

Temic DQ250 0D9300043B / 52020D9300043B_5202_OPYR

An original (stock) flash read of the Temic DQ250 control unit, hardware number 0D9300043B and software number 52020D9300043B_5202_OPYR, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Temic DQ250
File size
1,504.00 KB
Contents
Flash
Hardware number
0D9300043B
Software number
52020D9300043B_5202_OPYR

Technical data

Control unit
Control unitTemic DQ250
ECU makerTemic
Hardware number0D9300043B
Software number52020D9300043B_5202_OPYR
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keydd8ef16c6b1f8c5e

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ250 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0D9300043B and software number 52020D9300043B_5202_OPYR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DQ250

Temic DQ250 original files

The Temic DQ250 unit page