Original file

Audi Q3 2.0 TDI CR Temic DQ500 0BH300011K / ST3A0L0000000

An original (stock) flash read of the Temic DQ500 control unit, fitted in Audi Q3 2.0 TDI CR, hardware number 0BH300011K and software number ST3A0L0000000, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 2.0 TDI CR2.0 diesel 177.0PS / 130.2kW
Control unit
Temic DQ500
File size
512.00 KB
Contents
Flash
Hardware number
0BH300011K
Software number
ST3A0L0000000

Technical data

Vehicle
BrandAudi
Car modelQ3 2.0 TDI CR
Engine2.0 diesel 177.0PS / 130.2kW
Control unit
Control unitTemic DQ500
ECU makerTemic
Hardware number0BH300011K
Software numberST3A0L0000000
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File key3934fb0e2f695ea8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ500 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0BH300011K and software number ST3A0L0000000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DQ500

Temic DQ500 original files

The Temic DQ500 unit page