Original file
Audi Q3 Temic DQ500
An original (stock) flash read of the Temic DQ500 control unit, fitted in Audi Q3, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
- Vehicle
- Audi Q32.0 diesel 150PS
- Control unit
- Temic DQ500
- File size
- 1,504.00 KB
- Contents
- Flash
Technical data
| Brand | Audi |
|---|---|
| Car model | Q3 |
| Engine | 2.0 diesel 150PS |
| Power | 150.0PS / 110.3kW |
| Control unit | Temic DQ500 |
|---|---|
| ECU maker | Temic |
| File type | Original flash read |
|---|---|
| File size | 1,504.00 KB (1,540,096 bytes) |
| File key | a0955a5ccaa47f81 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Temic DQ500 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Temic DQ500
| Hardware | Software | Vehicles |
|---|---|---|
| Temic DQ500 | ||
| Audi Q3 2.0TDI CPSA DQ500 | Audi Q3 2.0TDI CPSA DQ500 | |
| Audi Q3 2011y CPSA DQ500 | Audi Q3 2011y CPSA DQ500 | |
| Audi Q3 2015y 2.5TFSI CEPA | Audi Q3 2015y 2.5TFSI CEPA | |
| Audi Q3 2015y CPSA DQ500 | Audi Q3 2015y CPSA DQ500 | |
| 02E300042G | Volkswagen VAG, Volkswagen Golf | |
| 037FSGELPGHG | Audi RS3 | |
| 0BH300011D | Volkswagen Tiguan | |