Original file

Dacia Sandero Valeo V40 1037100096

An original (stock) flash read of the Valeo V40 control unit, fitted in Dacia Sandero, software number 1037100096, 384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandDacia
Car modelSandero
Engine0.9
Fuelpetrol
Displacement0.9
Power90.0PS / 66.2kW
Control unit
Control unitValeo V40
ECU makerValeo
Software number1037100096
File
File typeOriginal flash read
File size384.00 KB (393,216 bytes)
File keyce3ebbc4f254a862
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Valeo V40 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037100096. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Valeo V40

HardwareSoftwareVehicles
Renault SCENICRenault SCENIC
Renault ScenicRenault Scenic
Renault meganeRenault megane
Renault scenic 3Renault scenic 3
1037100470Renault Clio
1037101192Dacia Sandero
1037101193Dacia Sandero
1037101195Dacia Duster

Valeo V40 original files

The Valeo V40 unit page