Original file
Ford Powerstroke Visteon EEC-V VGAE9AB
An original (stock) flash read of the Visteon EEC-V control unit, fitted in Ford Powerstroke, software number VGAE9AB, 224.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
| Brand | Ford |
|---|---|
| Car model | Powerstroke |
| Engine | diesel 190PS |
| Fuel | diesel |
| Displacement | 7.3 |
| Power | 190.0PS / 139.7kW |
| Control unit | Visteon EEC-V |
|---|---|
| ECU maker | Visteon |
| Software number | VGAE9AB |
| File type | Original flash read |
|---|---|
| File size | 224.00 KB |
| File key | f9ffbd75be185ecf |
| Price | €15 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Visteon EEC-V whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number VGAE9AB. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.