Original file

BMW ZF 6HP26 GS19_11_X_1MB_32 / 1267017192

An original (stock) flash read of the ZF 6HP26 control unit, fitted in BMW, hardware number GS19_11_X_1MB_32 and software number 1267017192, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW
Control unit
ZF 6HP26
File size
2,048.00 KB
Contents
Flash
Hardware number
GS19_11_X_1MB_32
Software number
1267017192

Technical data

Vehicle
BrandBMW
Control unit
Control unitZF 6HP26
ECU makerZF
Hardware numberGS19_11_X_1MB_32
Software number1267017192
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd321cd5c37260246

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a ZF 6HP26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GS19_11_X_1MB_32 and software number 1267017192. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of ZF 6HP26

ZF 6HP26 original files