Original file
BMW 5er ZF 8HP 142008J77AB2A4 / BMW_8HPXY_AT50012_Z0BA7700_J770A
An original (stock) flash read of the ZF 8HP control unit, fitted in BMW 5er, hardware number 142008J77AB2A4 and software number BMW_8HPXY_AT50012_Z0BA7700_J770A, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5erN47D20 · 190.0PS / 139.7kW
- Control unit
- ZF 8HP
- File size
- 2,048.00 KB
- Contents
- Flash
- Hardware number
- 142008J77AB2A4
- Software number
- BMW_8HPXY_AT50012_Z0BA7700_J770A
Technical data
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a ZF 8HP whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 142008J77AB2A4 and software number BMW_8HPXY_AT50012_Z0BA7700_J770A. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.