Original file

Audi A8 D4 usa ZF 8HP 4H1927158CT

An original (stock) flash read of the ZF 8HP control unit, fitted in Audi A8 D4 usa, hardware number 4H1927158CT, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 D4 usa4.0 petrol
Control unit
ZF 8HP
File size
2,048.00 KB
Contents
Flash
Hardware number
4H1927158CT

Technical data

Vehicle
BrandAudi
Car modelA8 D4 usa
Engine4.0 petrol
Control unit
Control unitZF 8HP
ECU makerZF
Hardware number4H1927158CT
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key31af3f2c01df7961

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a ZF 8HP whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H1927158CT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of ZF 8HP

HardwareSoftwareVehicles
4H1927158CHAudi
4H1927158CKAudi
4H1927158CMAudi A8
4H1927158CPAudi
4H1927158DBAudi
4H1927158DCAudi
4H1927158DEAudi
4H1927158DFAudi

ZF 8HP original files