Original file

BMW G30/G31 ZF 8HP #EGS__ZFB_CC#D1#SUB##CC420-000

An original (stock) flash read of the ZF 8HP control unit, fitted in BMW G30/G31, hardware number #EGS__ZFB_CC#D1#SUB##CC420-000, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW G30/G312.0 petrol 183PS
Control unit
ZF 8HP
File size
2,560.00 KB
Contents
Flash
Hardware number
#EGS__ZFB_CC#D1#SUB##CC420-000

Technical data

Vehicle
BrandBMW
Car modelG30/G31
Engine2.0 petrol 183PS
Power183.0PS / 134.6kW
Control unit
Control unitZF 8HP
ECU makerZF
Hardware number#EGS__ZFB_CC#D1#SUB##CC420-000
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key3e53ac6270833a99

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a ZF 8HP whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number #EGS__ZFB_CC#D1#SUB##CC420-000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of ZF 8HP

ZF 8HP original files