Original file

Audi A6 ZF ZF6HP19 4F2910156J / 7FP-27

An original (stock) flash read of the ZF ZF6HP19 control unit, fitted in Audi A6, hardware number 4F2910156J and software number 7FP-27, 192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A62.7 diesel
Control unit
ZF ZF6HP19
File size
192.00 KB
Contents
Flash
Hardware number
4F2910156J
Software number
7FP-27

Technical data

Vehicle
BrandAudi
Car modelA6
Engine2.7 diesel
Control unit
Control unitZF ZF6HP19
ECU makerZF
Hardware number4F2910156J
Software number7FP-27
File
File typeOriginal flash read
File size192.00 KB (196,608 bytes)
File key5f407c0a826cb293

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a ZF ZF6HP19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4F2910156J and software number 7FP-27. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of ZF ZF6HP19

HardwareSoftwareVehicles
4F1910156BDAR47722Audi A6
4F5910156CAudi A6

ZF ZF6HP19 original files